Horizontal Laminar Downflow Type
|
::Feature & Application
The Horizontal Laminar Downflow Type is to keep High Clean Class by setting
up filter on ceiling and blowing down Horizontal Laminar Flow to circle
it downwards. It is easy to change manufacturing process and lay out
equipment.
- Purification : CLASS 1 ~ 1,000
- Circling Speed : 500 ~ 1,000 Cycle/h
- Airflow Speed : 0.25 ~ 0.5 m/sec
|
 |
Vertical Laminar Flow Type
|
|
|
|
|
|
|
|
::Feature & Application
The Vertical Laminar Flow keeps relatively high purification by setting
up filter on a wall side and blowing out Vertical Laminar Flow to circle
it on a opposite wall side.
- Purification : CLASS 100 ~ 10,000
- Circling Speed : 1 00 ~ 300 Cycle/h
- Airflow Speed : 0.45 ~ 0.6 m/sec
|
 |
Turbulent Flow Type
|
::Feature
& Application
The Turbulent Flow Type, which is a most widely used standard, is to
circle Horizontal Laminar Downflow downward to wall side of ground by
setting up filter on a portion of ceiling and blowing down Horizontal
Laminar Downflow.
- Purification : CLASS 1,000 ~ 100,000
- Circling Speed : 20 ~ 60 Cycle/h
- Airflow Speed : 1 ~ 3 m/sec |
 |
Tunnel Type
|
|
|
::Feature
& Application
The Tunnel Type is similar to Horizontal Laminar Downflow Type, but
you may cut down fitting and operating expenses since it has self-reliance
of each mode; it is possible to control precisely in each working process;
and it is easy to install more because each system consists of prefabricated
units.
- Purification : CLASS 1 ~ 1,000
- Circling Speed : 500 ~ 1,000 Cycle/h
- Airflow Speed : 0.3 ~ 0.5 m/sec
|
 |
